Stunt scooter Explore STORM II New, HIC, d-110, grey

1. The design is simplified as much as possible. System-HIC.

A little about the HIC compression system for stunt scooters: this compression system is the most used because of its lightness and reliability. It consists of the fork itself, a special spacer, a bolt, a clamp and an “anchor” in the inside of the fork; compression is maintained by a bolt screwed into the “anchor” in the fork.

Compression is the part with which the scooter's handlebars are attached to the fork.

2. The frame of this scooter is reinforced and made of aluminum, and welds are visible at the junction of the main elements.

3. The wheels of the model are 110mm in diameter with high rigidity, made of PU. Aluminum wheels.

4. ABEC 7 bearing makes the scooter truly fast and easy to accelerate while performing tricks.

5. The rather long, narrow deck is covered with a special sandpaper, which will provide better grip of the rider’s foot with it.

6. The handlebar pads, in other words the grips, of this scooter are made of durable non-slip material.

7. Two pegs on the scooter axles.

Materials:

Construction - 50% high-strength aluminum, 50% steel;

Wheels - 110 mm PU (polyurethane);

Wheel rims - high-strength aluminum;

Steering wheel width - 52 cm;

Deck size - 50*10 cm;

Height of the steering wheel from the floor - 84 cm;

Handles are rubber.

Pegs – 5.4 cm.

Maximum load: 100 kg.